Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Overview

 

Emerson Hall has an AV System installed in a room on the main floor, much like Arnett Hall AV System or Upper Gwinn.  Learn how to use of the Emerson AV (Audio Video) System below. 

How to use the AV System

  1. Located behind the Emerson Piano is the AV System.


  2. Connect device via VGA Cable to the "Computer In" input. Note: Alternatively you can connect via AUX Video connection below the "Computer In" input. 


  3. Select "PC" from both Extron Controllers. Note: If using "DVD or AUX Video" connection appropriately select "DVD/AUX" from both Extron Controllers.


  4. Connect sound to the AUX cable located to the right of VGA video input. Note: Do not use the "Audio In" input located below the "Computer In" input. 


  5. Turn the CTs 4200 sound system power on. 


  6. Volume controls are located on the Extron Controller. Just use one of them to control the sound volume.


  7. Lower projector. Switch is located in the lower right hand corner. 


Filter by label

There are no items with the selected labels at this time.

  • No labels