Page Comparison

This touch panel has a guided walkthrough you can access from the main Start page (as seen in the photo below) or from the Help page at any time to get a refresh on the control system.

The guided walkthrough has a page for each section: starting the system, input sources, projector controls, camera controls, microphone controls, volume, and the help page.

1. First, turn on the system by pressing anywhere on the touch screen.

   1. This will take you to the home page, with the input sources and volume control (as seen below).

2. Select your input source: PC, Laptop, or Doc Cam.

   1. PC: sign into the in-room desktop. It may be in extended mode, which treats the projector as a secondary screen and will only display when signed into the PC. To change it back to duplicate mode, navigate to Settings > System > Display > scroll to Multiple Displays > select Duplicate these displays from the drop-down menu.

   2. Laptop: plug in your device into the HDMI cable directly or use the USB-C adapter

   3. Doc Cam: Check that the Doc Cam power switch is set to on--this is indicated by the green marking behind the switch.

You can utilize the microphones and camera on either the in-room PC or your personal laptop for conferencing & recording.

Selecting Inputs

PC: Teams, Zoom, and Panopto should auto-select the camera & microphones as these are already connected to the desktop.

• On your application of choice, select Mediaport 300 for both inputs if these aren’t auto-selected.

Laptop: Plug in the USB cable labeled as “Cam & Mics” and then Teams, Zoom, and Panopto should auto-select these.

• On your application of choice, select Mediaport 300 for both inputs if these aren’t auto-selected.

Recording Instructions

You can record directly in Teams or Zoom while conferencing or simply record sessions in Panopto.

Zoom:

• To begin recording, click … More > select either record to the cloud or record on this computer.

• To end or pause recording:

  • To pause, select … More again > pause recording.

  • To end, you can either click … More again > end recording OR simply end the meeting to also end & save the recording.

Teams

• To begin recording, click … More > Record and transcribe > Start recording.

• To stop recording, click … More again > Record and transcribe > Stop recording OR simply end the meeting to also end & save the recording.

Panopto

• Navigate to https://spu.hosted.panopto.com/Panopto/Pages/Home.aspx and select + Create for a multitude of recording options.

  • There are instructional videos directly on this home page.

  • Also reference this Panopto guide for recording https://support.panopto.com/s/article/Record-a-Video.

*For more Panopto training, please contact the office of Education Technology Media (ETM) at etmhelp@spu.edu.

Camera & Mic Controls

Camera controls

• Presenter Camera: There are two locked presets for the presenter camera: the wide-angle view and the zoomed-in view of the front of the room. There is also an auto-tracking mode that can be toggled on to follow the presenter.

  • Users can set presets 3 & 4 as desired by positioning the camera with the directional arrows & zoom in/out controls and then holding buttons 3 or 4 for 3 seconds. See the camera control page below.

**Secondary camera info for this room coming soon!

• Audience Camera: Simply select the audience camera from this page to switch over to that view. It will show a wide view of the seats.

Info
You can only select one camera at a time for your meetings and recording. However, switching between the two on the camera control page is easy.

Microphone Controls

There are two microphones: a lapel microphone and handheld microphone. While amplifying your voice locally, the mics can simultaneously be used in conferencing or recording as we programmed specific Acoustic-Echo Cancellation (AEC) software.

• Presenter Volume & Mute: Control the individual Mic levels and Mutes from the Mic Levels page OR the Overall Mic Level & Master Mute from the Home page. See both below.

• Amplification: If you would like only use the microphones for conferencing/recording and not amplify your voice locally, simply turn on the Master Mic Mute.

  • Thus, this only mutes the local amplification.

  • This also means you must manually mute your microphone within the Teams/Zoom/Panopto application if you want it muted in your meetings or recording.

**Boundary mics info for this room coming soon!

• Audience Mute: The audience microphones will always be muted when not conferencing or recording. While conferencing & recording, you will have the option to mute the audience mics as necessary, from either the Home page or Mic Levels page (this feature is coming soon!).