Page Comparison

This touch panel has a guided walkthrough you can access from the main Start page (as seen in the photo below) or from the Help page at any time to get a refresh on the control system.

The guided walkthrough has a page for each section: starting the system, input sources, projector controls, camera controls, microphone controls, volume, and the help page.

You can utilize the microphones and camera on either the in-room PC or your personal laptop for conferencing & recording.

Selecting Inputs

PC: Teams, Zoom, and Panopto should auto-select the camera & microphones as these are already connected to the desktop.

• On your application of choice, select Mediaport 300 for both inputs if these aren’t auto-selected.

Laptop: Plug in the USB cable labeled as “Cam & Mics” and then Teams, Zoom, and Panopto should auto-select these.

• On your application of choice, select Mediaport 300 for both inputs if these aren’t auto-selected.

Recording Instructions

You can record directly in Teams or Zoom while conferencing or simply record sessions in Panopto.

Zoom:

• To begin recording, click … More > select either record to the cloud or record on this computer.

• To end or pause recording:

  • To pause, select … More again > pause recording.

  • To end, you can either click … More again > end recording OR simply end the meeting to also end & save the recording.

Teams

• To begin recording, click … More > Record and transcribe > Start recording.

• To stop recording, click … More again > Record and transcribe > Stop recording OR simply end the meeting to also end & save the recording.

Panopto

• Navigate to https://spu.hosted.panopto.com/Panopto/Pages/Home.aspx and select + Create for a multitude of recording options.

  • There are instructional videos directly on this home page.

  • Also reference this Panopto guide for recording https://support.panopto.com/s/article/Record-a-Video.

*For more Panopto training, please contact the office of Education Technology Media (ETM) at etmhelp@spu.edu.

Camera & Mic Controls

Camera controls

• There are two locked presets for the camera: the wide-angle view and the zoomed-in view of the front of the room. There is also an auto-tracking mode that can be toggled on to follow the presenter.

  • Users can set presets 3 & 4 as desired by positioning the camera with the directional arrows & zoom in/out controls and then holding buttons 3 or 4 for 3 seconds. See the camera control page below.

Microphone Controls

There are two microphones: a lapel microphone and handheld microphone. While amplifying your voice locally, the mics can simultaneously be used in conferencing or recording as we programmed specific Acoustic-Echo Cancellation (AEC) software.

• Volume: Control the individual Mic levels and Mutes from the Mic Levels page OR the Overall Mic Level & Master Mute from the Home page. See both below.

• Amplification: If you would like only use the microphones for conferencing/recording and not amplify your voice locally, simply turn on the Master Mic Mute.

  • Thus, this only mutes the local amplification.

  • This also means you must manually mute your microphone within the Teams/Zoom/Panopto application if you want it muted in your meetings or recording.